MidNite Solar Kid MPPT Charge Controller for Hydro and WindThe KID for Hydro and Wind is a 30a 150v MPPT charge controller. It features tracking algorithms specifically designed to maximize power harvest from your hydro or wind turbine. The KID allows you to charge battery banks at your custom settings from 12 48v nominal. With a two wire Automatic Generator Start (AGS) as standard equipment, the KID detects when the generator is running by watching battery voltage over time. WIND OR HYDRO only WARNING: the

60 in (length) × 0

As the years marched on many of the chemicals that made the old spray paint formulas stick to metal so well where slowly banned from use in all consumer products BUT professionals could still have access to them

The remote allows for easy on and off operation without using the rocker switch on the inverter

Input Under-voltage

also it will reduce the Max charging current by 10% with every two degree of temperature rise

Unit Weight: 1

DC Output Short Protection

Click here for the product manual

Output frequency: 50 Hz

Check your air diffusers for clogging

which allows a 300 percent surge capacity for up to 20 seconds

USB Port: 5V 1A