Custom 3d Printed Tank Mount for Reef Breeders Meridian 35 & Meridian 45These are custom made 3d printed tank mounts. They were designed for the Reef Breeders Meridian 35 and Meridian 45 Lights to be mounted on a 1 2inch acrylic, can custom make for other size tanks, just need to let us know the width of your tank glass or acrylic so we can adjust the mount prior to making it. These are custom mounts made to order. When mounted on the tank, the light is approximately 20 to 21 inches off the top of the tank. Leaves plenty

pH-modifying components

Note: Not compatible with threaded PVC

and program timed lighting cycles

Metered Application: If mixing a larger amount of Integr8 Σ fγ suspension than will be required for 12 hours

With intake grille: 8" L (20

1 x 420nm Violet

the light is approximately 20 to 21 inches off the top of the tank

The original layout has an 18K blue look with all channels equal

The RP-M V2 is about half the size of conventional powerheads with comparable output

The Nautilus DC Pump has a built-in slow start function and runs whisper-silent

Secure the screws firmly

then substitute purified water for system water in the preceding instructions