Organic light emitting diode (OLED) displays - Measuring methods of optical and electro-optical parameters1 Scope This part of IEC 62341 specifies the standard measurement conditions and measuring methods for determining optical and electro optical parameters of organic light emitting diode (OLED) display modules, and where specified, OLED display panels, in the following areas: a) luminance and uniformity; b) dark room contrast ratio; c) chromaticity, colour uniformity, colour gamut and white field correlated colour temperature; d) power consumption.

even if they are providing services to UK consumers

For comparison purposes

• Detectors and phantom materials for clinical dosimetry of beta radiation

- Sufficient for

f) non-armoured cable having individually non-metallic screened cores and a rated voltage 600/1000 V

5 c) and d)

BS EN 2349-407 is a standard that covers testing relays for cold

only laboratory mixers are covered

ISO/IEC 10089 consists of a case containing an optical disk

6 and BS 1892-2

the agreement of the set values of the NIBP simulator and the displayed values of the tested automated sphygmomanometer or the properties of the cuff and tubing

these Parts may be obtained separately but they are inter-dependent