Alpha HSS Tap Set MF 12x1.5 MFHS120150Alpha Tap Sets contain a Taper, Inter and Bottoming tap. TAPER taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes. Alpha Taper taps can be identified by the single ring on the shaft near the driving square. INTERMEDIATE taps have a lead of four threads and are used in most general purpose applications. Alpha Intermediate taps can be identified by the two rings on the shaft near the driving square.

transmissions and motor housings

- up to 25 % increased stock removal

Weight (gr)    18

Fast curing

petroleum-based anti-seize lubricant paste fortified with graphite and extreme pressure (EP) additives

½ in Included Angle Carbide Burr

3/8" x 65mm

200mm diameter polyurethane tyred cast iron centred wheel with a maximum capacity of 1200kg and has a tyre width of 50mm

Metric Sizes:

LOCTITE 518 fills gaps up to 0

# 34848 -  95gm

The 500mm (20”) Heavy Duty Pedestal Fan is packed with features to assist and help you get the job done comfortably