1-7/8" x 3" Stainless Headers. LS Swapped 1982-1992 Camaro/Firebird.Kooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best Headers and complete exhaust systems for your street, race and off road applications. We have won hundreds of championships and set countless records in the NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA and many other racing organizations. Now with three generations of family leadership, we are proud

the cataloged offerings are summarized as follows: Rebound: “B”: Baseline digressive valving “F”: Firm digressive valving Double Adjustable Compression: “A”: Baseline digressive valving “G”: Firm digressive valving with a fixed low-speed bleed “H”: Firm digressive valving Triple Adjustable Compression: “A”: Baseline digressive valving “H”: Firm digressive valving “R”: Extreme firm digressive valving The following combinations will be offered as standard for the Berserker Series: Double Adjustable: “AB”: Baseline Valving “GF”: Handling applications “HB”: High force compression with baseline rebound “HF”: High force compression with tie-down rebound Triple Adjustable: “AB”: Baseline valving “HF”: Handling Applications “RB”: High force compression with baseline rebound “RF”: High force compression with tie-down rebound

Two Mesh Zippered Pouches In The Top Cover

and you can dial in exact camber values for each side of the vehicle using the upper arm

As part of the SPEC Corvette racing series

The Berserker™ is available in double adjustable

SPL Parts Adjustable Camaro Rear Toe Arms Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight Blue Anodized Titanium Socket Head Cap Screws 6061-T6 Aluminum Rotating Clamp design  Low friction 3 piece Teflon lined FK Heim joints/Rod Ends Applications:  2016+ Chevrolet Camaro (6th Generation) Installation Instructions: SPL RUA CAM6 Instructions Need Replacement Rod Ends

9 Hex Cap Bolts with Lock Nuts Sold as a pair

SPL Parts Camaro/ATS Rear Toe Arms Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight Blue Anodized Titanium Socket Head Cap Screws 6061-T6 Aluminum Rotating Clamp design Teflon lined FK Heim Joints and Rod Ends Sold as a pair

We have won hundreds of championships and set countless records in the NHRA

This product incorporates the spacers normally found on either side of the heim joint of your aftermarket control arm that was originally intended to fill the width of the stock mounting location

the rubber will deflect

slick tracks or allow for easy-up weight transfer or rear separation